Hytera PD362i DMR Portable UHF 3-Watt Radio

The Hytera PD362i is a UHF (430-470MHZ) digital mobile radio with 3-watts of power and 256 channel capacity. The PD362i radio comes standard with a 2,000mAh lithium-ion battery, charger, belt clip holster and programming.

 

Pocket Size Design
The color display allows good visibility even under extremely strong light. The compact antenna  design and light weight PC & Metal frame design. The Hytera PD362i is 4.84 x 2.17 x 0.91 inches weighing  5.64oz.

Micro USB Port
The Micro USB port allows you to use a standard USB to Micro USB to charge the radio.

Compact Antenna
The creative and compact antenna design makes the PD362i sleek and gives it a cellular phone feel.

Dual Mode: Analog & Digital
Dual mode (analog & digital) operation ensures a smooth analog to digital migration.

One Touch Call/Text
Supports One Touch features that comprise of Preprogrammed Text Messages, Voice Calls and Supplementary Features.

Simple Scan
Capable of scanning of analog voice/signaling or Digital voice/data.

Versatile Voice Calls
The intelligent signaling supports various voice call types, including Private Call, Group Call , and All Call.

Various Analog Signaling Types
Various analog signaling types various squelch control types (CTCSS / CDCSS), thus this digital mobile radio provides higher function expansion capacity to the analog world.

Monochrome Display
Two line display with monochrome color and supports messaging  with up to 64 characters.

 

 

General data
Frequency range	UHF: 430 - 470 MHz
Channel capacity	256 (128 Analog / 128 Digital)
Zone capacity	16
Channel spacing	12.5/25 kHz
Operating voltage	3.7 V
Battery	2000 mAh Li-Ion
Battery service life (5/5/90)	approx. 10 h (analog) approx. 12 h (digital)
Frequency stability	±0.5 ppm
Antenna impedance	50 Ω
Dimensions (H×W×D)	4.84 x 2.17 x 0.91 Inches
Weight	5.64 oz
Transmitter
RF Power Output	UHF: 1.5 / 3 W
FM Modulation (Analog Emissions Designator)	11 K0F3E at 12.5 kHz 16 K0F3E at 25 kHz
4FSK Digital Modulation (Digital Emissions Designator)	12.5 kHz (data only): 7K60FXD 12.5 kHz (voice & data): 7K60FXW
Conducted/Radiated Emission	-36 dBm < 1 GHz -30 dBm > 1 GHz
Modulation limiting	±2.5 kHz at 12.5 kHz ±5.0 kHz at 25 kHz
FM Hum & Noise	40 dB at 12.5 kHz 45 dB at 25 kHz
Adjacent channel selectivity	60 dB at 12.5 kHz 70 dB at 25 kHz
Audio Response	+1 dB to -3 dB
Audio Distortion	≤ 3%
Digital vocoder type	AMBE++ or SELP
Receiver
Sensitivity (analogue)	0.22 μV (12 dB SINAD) 0.22 μV (typical) (12 dB SINAD) 0.4 μV (20 dB SINAD)
Sensitivity (digital)	0.22 μV / BER 5%
Adjacent channel selectivity TIA-603 ETSI	60 dB at 12.5 kHz / 70 dB at 25 kHz 60 dB at 12.5 kHz / 70 dB at 25 kHz
Intermodulation TIA-603 ETSI	70 dB at 12.5/25 kHz 70 dB at 12.5/25 kHz
Spurious response rejection TIA-603 ETSI	70 dB at 12,5/25 kHz 70 dB at 12.5/25 kHz
Spurious response rejection	40 dB at 12.5 kHz 45 dB at 25 kHz
Nominal audio power output	0.4 W
Nominal audio distortion	≤ 5 %
Audio sensitivity	+1 dB to -3 dB
Conducted spurious emission	< -57 dBm
Environmental Specs
Operating temperature range	-30 °C to +60 °C
Storage temperature range	-40 °C to +85 °C
ESD	IEC 61000-4-2 (level 4)  ±8 kV (contact discharge) ±15 kV (air discharge)
Protection against dust and moisture	IP54
Shock and vibration resistance	MIL-STD-810 C/D/E/F/G
Relative humidity	MIL-STD-810 C/D/E/F/G
All technical indications were tested according to the corresponding standards. Subject to change on the basis of continuous development.